Sounding Board

My curiosity about sound is completely engaged by exploring modular synthesis. So far my understanding is often inarticulate and mystified! But thanks to Suzanne Ciani, True Cuckoo, Andrew Huang, Ultrabillions, Hark Madley, Lisa Belladonna, Caterina Barbieri, Moogfest, Bram Bos, and Kim Bjorn’s book Patch and Tweak, I am evolving a different way of creating soundscapes and perceiving the world. This is the stuff of life! Waveforms modulating waveforms, waveforms shaping waveforms, waveforms reflecting, refracting and bouncing around and through us. Energetic matter begins and ends on a wave.

I am focusing my Artists Residency here at home on improving my mixing skills and building a sounding board. The mixing skills are put to the test making the recording of Carnatic Water Music that iBoD will release in the next week. As I mixed this recording I received helpful suggestions from tutorials by Jason Moss, HarkMadley, Mathew Weiss. These skills are a forever work in progress. As for the sounding board, there are currently three main ingredients: Elektron:Model Samples as main sequencer providing beats/patterns and midi triggers to the Behringer Neutron. Audio out from both of these units into Audio Tracks in Ableton Live. Ableton will provide drones, loops, and AAC/EG clips which can process audio from either unit. I can do Master recordings in Ableton as well.

Even though I want a modular system, I will work with what I have now, and learn, and be ready when my modular system appears. (Make Noise modules are the ones that I want- doo doo do do)

The Model Samples and I are getting on fairly well. I am learning the architecture of the menus, watching people perform with it to see what key combos they use, and setting up some patterns. The samples available “in the box” are very cool and I am curating my own samples as well. Every sound is potential material so it is daunting.

The past few days, I experimented with some patch ideas in the Behringer Neutron. I have gotten alot of growling out of the synth, but no sound that I liked. There is one simple patch I use: the Sample and Hold into Delay Time. When the Delay Mix knob is raised and the S&H knob is turned up, there are lots of odd, random pitch artifacts that I enjoy hearing. Today I patched the Osc Mix into a Mult, then ran Mult 1 to the OD(overdrive)IN, and Mult 2 to Pulse Width 2. Tuned the oscillators to consonant pitches. Slowly turning the Osc Mix Knob opens a whole realm of timbres. When the OM knob was all the way to one side the tone could be made clear and bell-like. With the Oscillator shapes in the square or tone mod shape, the Pulse Width knob seems to act as a filter.The Mod Depth and Envelope Depth can be brought in. This is where I am not sure what is happening – there are changes in the timbre of the tone from the synth. And what exactly is depth? There is alot to play with depending on where the Osc Mix dial is tuned in.

The third part of this is creating Audio Animation Clips/Envelope Generators within Ableton. Envelopes shape the amplitude and modulate the pitch of the sound. Audio Animation allows the Envelope parameters to move over time. Here is the post on how audio animation can be created in Ableton: https://wp.me/p5yJTY-vL I use filters to sculpt out harmonics and add texture to the sound of the Model Samples or the Neutron. So far, I am experimenting with banks of filters to sculpt out or boost particular harmonics then perform a finer tuning with some EQ. I am listening for a diverse sonic spread, then tuning it in, then spreading, and finally fine tuning.

The adventure continues!!

Modular synthesizing in Ableton Live

Even though I have worked intimately with Ableton Live DAW (Digital Audio Workstation) for over eight years, I KNOW I have only scratched the surface of its capabilities. In the last few years, I have come to think of Ableton Live as my “instrument”, my medium, what I create with. What an incredibly rich and mysterious instrument it is! Now I am enamored of modular synthesis, striving to be come engaged with modular synthesis, particularly Eurorack modules. I love the knobs and sliders, and the patch cables just put me over the top. Modular synthesis is like sonic legos, a form of prayer, and a particular patterning of vibrations that matter. I want to plaaayyyy!!

This is the 2019 plan: spend time researching, listening to and playing modular units. I am learning about how modulars work by playing with the Ripplemaker ios app on iPad. Ripplemaker is a semi modular synthesizer which means that some of the signal routing is already patched together. Ripplemaker contains five modules, an LFO and amplifier/mixer, so it is a good basic learning tool. In addition I am studying the book Patch and Tweak which just came out a few months ago. It is a comprehensive survey of modular synthesis from the basics, to the gear, to the practitioners. I bought the book because it contains an interview with a performer whose work I admire tremendously, Caterina Barbieri. The book is a treasure trove of information that I am studying every day. The write ups about all the major brands and models of Eurorack synth modules is amazing. While Patch and Tweak could pass as a coffee table book, it is a bible to me. While doing all of this, I will save the money to buy my first modular synth unit. This could happen at Moogfest, or sooner depending on the progress of research and saving.

As for now, I have invested alot of time and money in Ableton Live and my computer set up, which is essentially a soft synth – I just need to configure it as such. Up to this point, I have treated Ableton as a composition tool/recording studio for the most part. I have been performing with Ableton and learning how to use the control surfaces (Novation LaumchPro and AKAI Key 25) to create soundscapes in real time. Now I want to configure and play Ableton more like a synth. This new approach will mean I have to deeply learn all the audio effects in Ableton, and other external plugins. I can configure the control surfaces to function as synth controls by mapping the parameters I want to sculpt with to the knobs and sliders of the control surfaces. The rest is signal routing.

Ableton Live is so robust and complex that the signal routing possibilities are numerous. Audio effects can be placed on tracks, within tracks routed together through a group submix, within a clip, within send/return tracks, on the Master track. Then within the larger set, tracks can be routed to and through each other using the in/out sub menu embedded in each track. So, with this in mind, how can I create control voltages, oscillators, slopes, envelopes, LFOs, Noise, and other modulators and configure them and play with them within Abelton Live?

The journey begins…

*photo of basic Auto Filter from Ableton Live Manual