iBoD – Playing by Ear with Lisa Means: Hearing the Ethers

Lisa bought a new guitar! A John Suhr limited edition commissioned electric guitar signed by the maker in a faux alligator hardshell case. The top of the guitar is quilted maple and looks like rippled water. Lisa bought the guitar because it’s voice eclipsed the sound she was carrying around in her mind. She said she had this jazzy sound in mind with rhythm (swingy, danceable) and a clean, clear tone when plucked (like George Benson). The Suhr guitar has a lovely tone with crisp, clean edges and bell-like shape. The sound the Suhr guitar planted in Lisa’s earbrain is more “New Agey”

A few weeks back, I sent Lisa a thumbdrive with recordings of our sessions since June. She reports that the recordings were not helpful to her as she couldn’t pick out her voice from the whole soundscape. This is good to know- the recordings give me a lot of information, but not so for Lisa. I know she listens to music by turning it up very loud in her home, so I asked if she did the same with the session recordings. She explained that she has sound reference files in her brain that pick up on familiar patterns associated with the song she is listening to. Without these references, Lisa is less able to make sonic sense of what she is hearing.

Our September 28 2019 session focused on the new guitar and what it brings to our pallette. And we played in a different relationship today. Instead of Lisa’s guitar through the Neutron, we played on separate channels. Lisa wanted to hear her new guitar clearly since she is just learning it, so I played the Ripplemaker through the Neutron. In this configuration, Lisa leads the way, while I bring interesting underpinnings into the mix.

Listening back to the recording, I think this is another way for us to play together. Our collaboration becomes more like intermingled solos, so the impact of our playing together is indirect rather than direct. Our voices are tandem rather than merged, and we can respond to each other. One question is how to create useful audio reference patterns for Lisa? She said that she couldn’t hear the recordings in the thumb drive because they were too removed from what we are doing currently. So it seems possible that if she listens to a recording from the most recent session, she could create new reference files. We will try this out.

The October 5 session is when things came together. Lisa brought another guitar – a 17″ wide arch-top Kay guitar which she describes as the kind of guitar you would find in the Sears catalogue in the 1950s. She played that and the Suhr while I created morphing streams of sound sequenced by Ripplemaker and modulated by Neutron through Abejusynth Station modules. The quality of the sounds of the sequence can be altered within the Ripplemaker, then in the Neutron. Then the audio signal from the Neutron goes through an Ableton audio track, which can then be sent through and altered by the Abejusynth Station AAC/EG modules. (For more info, go here: https://wp.me/p5yJTY-vL). Any of these Ableton tracks can go through delay send and a reverb send. So there is a whole lotta modulating going on!!

Kayguitar4blog

Oct5Session4blog

After our October 12 session, I am very excited about our playing as intermingled soloists at 919 Noise Showcase on October 30. We ran ourselves through my Roland Eurorack mixer (Thanks, Jim!) so I could balance the sound. Then I recorded into 2 H6n tracks and in the room. We decided to start with a wave of sound and then whittle it down. I was not sure this was working, but listening to the recording, I decided we need to just listen close and have faith that it IS working.

Here is a mix of the 2 H6n tracks AND the room recording. This seems like an interesting way to capture sound recordings in the SunRa Room. That said, this mix has too much synth and not enough guitar, and we will fix that so the blend is better in the future.

Playing by Ear

Come and hear us play the ethers at 919 Noise this Wednesday 10/30 at 8:30!

Frankensynth

Ever since I saw Caterina Barbieri at the Pinhook during Moogfest 2018, my deepest desire has been to dive into the sonic sketches/sculptures/landscapes of modular synthesis. Caterina’s album title, Patterns of Conciousness, says it all. This sounding out of the electrical impulse that is at the heart of sonic events has become my spiritual practice, my way of hearing and understanding the world, my container of wonder!

The world of modular synthesis is dense with creative pathways and quite expensive, so I decided to start with what I have – Ableton Live, my soundscape companion for 8 years. For a while, I worked on creating Audio Animation Clip/Envelope Generator modules. This can be done by animating effects within muted audio clips so only the effects are heard, and then routing audio through the clips from a source track. The source audio is then modulated by the effects in the AAC/EG track. I used this for The Space ReSounds of Water to capture and modulate the live sound of the bells. Here is an example:

Then I bought my first hardware synth – a Behringer Neutron. This synth had great reviews, it has knobs and patchbay, and can be sequenced by Ableton. Ableton is beta-testing a pack that allows the DAW to play Control Voltages. I am not sure how this works, but it involves having an interface that is DC-coupled. And this will be for Ableton 10 Suite users, which I am not yet. All of this to say, I have not been successful at getting the Neutron conversing with Ableton via midi. I have had success with the Neutron by running audio signals through the input with the VCA bias knob all the way open. This worked out well as you know if you heard our All Data Lost performance!

Before the Behringer, there was Ripplemaker iOS semi-modular synth, which I have played with for a few years now. We are old friends, and I can sit down to a fresh template on Ripplemaker and get going immediately with cool sonic relationships. This app will teach you about synths in a deep way. In the beginning, I referred to the manual constantly, but now it is easy to just jump in and play for long periods of time. Here is a recent soundscape performed on the Ripplemaker to accompany Jody Cassell for the last PROMPTS at The Carrack.

Now the fun begins! After some experimentation, I have cobbled together my Frankensynth. I begin with sequencing in the Ripplemaker, which provides the audio source for Neutron. So we have an iOS synth and a hardware synth playing together. Then the audio from the Neutron goes through a track in Ableton. Seven additional tracks in Ableton are each running AAC/EG effects and receiving audio from the track carrying the Neutron. So the Ripplemaker/Neutron generated audio will be heard through whichever AAC/EG track’s volume fader is up. So these three synths (Ripplemaker, Neutron and Abeju Synth Station) are sitting inside each other like nested dolls. Here is a sample of how this can sound: (recorded in the SunRa Room on a rainy day!)

I am very excited to play this setup with Lisa Means on guitar at the 919 Noise Showcase on October 30th at The Nightlight Bar in Chapel Hill!!

Audiorigami Phase 2

Since releasing Audiorigami (Meditations on the Fold), my sonsense as to how to explore the Fold has shifted. This shift is in sync with Glenna Batson’s return to Durham and the start of a monthly Human Origami Jam. Glenna is interested in exploring folds through a variety of deep somatic frameworks. She narrates the biomolecular potentials that the body travails from utero through the many modulating intersections of growth . My own sonsense of the Fold is opening to the quantum aspects of sound and further harmonic interplay. I sense that these sonic realms might possibly allow access to some basic templates of life. Perhaps sound, in the form of patterned frequencies, guides life into being. Perhaps harmonic frequencies are part of a templates for the growth and movement of life forms through space and time. That is what I am playing with here.

The focus of Audiorigami will now be to explore the changing shapes of sounds themselves. Audiorigami will propogate, excavate, and modulate the folds that emerge from and disappear into the waveforms that are the vehicle of sound. Modular/ Granular Synthesis and Frequency Modulation are the methods for engaging with sound media. I plan to more carefully curate the sound sources I use and to do more sampling from my own recorded sounds.

Here are some excerpts from the Human Origami Jam which happened last month at ADF Studios. Glenna leads an exploration of lines and trajectories, corners and angles. The soundscape is my first rendering with some of the Abeju Synth Station modules I created from “dummy clips” in Ableton, coupled with TAL- Noisemaker VST synth plugin and Ripplemaker on the iPad.

Next Human Origami Jam will happen THIS FRIDAY March 15th at Joy of Movement Studios in Pittsboro NC from 4:30 to 6:30 pm. https://www.thejoyofmovementcm.com

Come join us!