Here is a 8 minute excerpt from dejacusse’ hour long broadcast on Thursday afternoon July 30 from 2:48 pm to 3:45 pm. (cause I eschew ideas of “perfection”, and all her followers and gatekeepers.) Today we featured Theta Waves (frequencies divisible by 5 and 8) at 200hz and under at 108 bpm. These Sine waves were then set off in relation to each other, and filtered through flangers, resonators, delays, reverbs and frequency filters within Ableton Live. The idea is to unfold harmonics from these interactions, and enfold them back on themselves. Some pretty cool stuff emerges- not for everyone, but if you feel the resonance, that is the best! Thanks for listening if you do!
Month: July 2020
One Knob Wonders in Ableton
Once again I find myself back with Ableton Live. A couple of posts ago, my sounding board was set and I was starting to put some things together in Elektron: Model Samples along with Ableton and the Neutron. Then a couple of the trigger keys on the Model Samples started sticking. This is comparable to a sticking piano key. At first, I was OK with having this be another random possibility within my workflow, but more triggers got in on the act, and I couldn’t tell which keys were sticking, and that random possibility became a more fixed probability. So for now the Model Samples is boxed up waiting to go to the technicians at Sweetwater whenever they get Elektron techs back at the shop. This is my last purchase from Sweetwater! I am miffed that this is taking months to resolve and I am left with several ideas in early development within the Model Samples that are now on hold. Instead of wasting energy being miffed, I am turning to some new ways to play in Ableton.
Under the Audio Effects subfolder DJ and Performance within Ableton Live, there are One Knob effects racks capable of creating dramatic changes to any sound when the One Knob is turned. The changes are achieved by placing several different audio effects in a rack and then using midi map to attach a variety of parameter changes from each effect onto the One Knob. The parameter ranges can even be adjusted as to how big a change the knob sweep brings. After working with Audio Animation Clips/Envelope Generators, this seems like a promising new direction to explore.
My favorite One Knob Rack is Fade to Gray, which houses a three band EQ and a Ping Pong Delay. Here are pictures of each of these effects:
Turning the One Knob lowers the mid frequency band of the EQ Three by 6dB while the low frequency and high frequencies sweep toward the midrange as the wet signal and feedback swoop up to 95%. Now a tiny slice of mid-range frequencies feeding back on itself goes into the Ping Pong Delay, where the signal and feedback go to 95%. All of these changes are happening over time and in relation to each other. While the end result is a thin and distant decaying echo of the completely subdued orginal signal, every stop along the One Knob sweep renders new sonic terrain. So cool!
Now I am inspired! What sorts of changes can be wrought in this environment? I want to make One Knob Racks that sculpt the sound in interesting ways! Start simple: made a few changes in the Fade to Gray letting in some lower range frequencies on the EQ3 and bringing the crossing frequencies together at a lower bandwidth. So this Fades to Throb rather than Gray. I suppose I should have picked a color- it would be Blue, Fade to Blue. Throb describes the end result more clearly, so that is the name!
For several weeks now, I have been making, testing, throwing away and saving One Knob Racks. My project contains an audio track with sound samples from Ableton and from Library dejacusse. That track is routed into another audio track which contains the One Knob Racks and is routed to the Master output track. With this setup, the original audio track signal goes directly to the One Knob track, so the original audio is heard through that track. When I close all the One Knob Racks (there are seven so far but I forsee hundreds) no sound comes out the Master track. All the frequencies have been gathered and are being held within the racks. One type of improvisation might be to slowly unveil the original audio by opening the One Knob Racks a bit at a time. When they are all completely at 0, the original signal and all its frequencies are now sounding through the One Knob track and out to the Master. So much potential here!
But wait, there is more! There are a couple of tracks hanging around over beside the Master Track. These are Return Tracks. The original audio track and the One Knob track both have two Sends knobs that send signal to the return tracks. This is another way to add some effects processing to a signal and also have it be available for all the tracks. As it turns out, the send knob on the original audio track can bring that signal forward through the return track even when all the One Knob racks are closed! This is sooooo cool, because as the One Knobs are opening, some of the original sound can be brought up into the mix to give listening ears some direction and excitation. The return tracks can also have effects on them. WoW!
This is exciting for me because it aligns with everything I am creating right now. I seek methods for including all frequencies in the sonic pallette, for rendering frequencies in as many dimensions as I can tune into, for conveying information/data/quanta via sound, and for creating diffuse, diverse sonic delights. I tune into joy and delight in many strange waveforms.
I am drawn to the idea of unFolding, uncovering, and revealing which this method opens up to. Also, the idea of integration and disintegration, which I started exploring over 10 years ago with Unhinged Melody (which later became Circuslocution with iBoD). The idea was an 8 bar upbeat riff that started as individual random sounding notes and slowly came together. Every note has its place and it eventually gets there with some extra notes for good measure! Each One Knob Rack will shape the sound into particular forms, then as one Rack feeds into another, the various level settings create new sonic relationships within the original audio.
Creating these One Knob Racks is teaching me so much about each audio effect in Ableton and what it does. The other part of this will be the sounds that pass through the Racks, what will they be? And then there is the order that the Racks are placed in to maximize the interplay of the Racks as they pass the sound around and through themselves.
Here is a quick journey through some of the sonic territory these knobs can uncover! The original audio is Eleanor Mills playing harmonica and me talking and playing uke. Listen for those times when the original sound is hard to distinguish.
Today I worked with a 8 second clip of Jim Kellough’s digital horn and here is the result: